Description
Pingel FI to Carb conv. kit FLH/T95-01
in Stock 3+
Brand: Pingel Enterprise
Article number: 744252
These parts are needed when you want to convert a fuel injection bike to a carbureted one. It will ensure that the J1850 databus that comes standard with fuel injected models is still working correctly so the original speedometer, tachometer, warning lights, Turn Signal/Security module, etc. can still be used. Also an adapter is needed to convert the fuel tank to accept a conventional fuel valve.
Note: To convert a fuel injection bike to a carbureted bike, wire modifications in the factory wire harness are necessary.
This product can be find in categorie Carburetors
Pingel fuel valve adapters An adapter to fit a fuel valve to a stock injected model gas tank. Because of the tight tolerances these adapters can only be used with our Pingel high flow fuel valve. These adapters are available for bikes that were originally fitted with either Magneti Marelli or Delphi fuel injection. Fuel valve must be ordered separately and because of the tight tolerances these adapters can only be used with our Pingel high flow fuel valve., For FLH/FLT series 1995-2001 originally equipped with Magneti Marelli fuel injection
———————————————————————————————————–
For more info about this product see our Catalog page 06-008, 0
See link Taco-Motos.Customparts.store or see our Flipbook
you can also find parts at our older website (www.taco-motos.eu)
