Description
5Pck James Gaskets Oil seal generator
30145-46A
in Stock 1
Brand: James Gaskets
Article number: 742869
Oil seal for the generator drive gear side on 1952 thru 1969 Big Twin and 1958 thru 1981 Sportster. made by James Gaskets. Sold in dealer 5-packs.
This product can be find in categorie Generator Parts
Generator oil seal (OEM 30145-46A)
Polarizing generators and regulators The following information and instructions are for your use, so your warranty will be in effect. No warranty can be in effect if these instructions are not followed. Whenever any component of a generator charged electrical system is serviced it is necessary to re-polarize the complete system, making sure it has the correct polarity so the system will charge in the right direction. If the system is put into service with the wrong polarity it may result in burned relay points, a dead battery and damage to both the regulator and generator. Instructions: 1. To polarize a generator system with a mechanical regulator, momentarily connect a jumper wire of adequate gauge (a battery cable is ideal) between the “bat” and the “gen” terminal on the regulator after all wires have been properly connected and before starting the motor. 2. To polarize a generator system with electronic regulator/ rectifier. Before mounting the generator of the vehicle, place the generator on a non conducting work surface (like a wooden bench) and connect the positive terminal of a battery to the armature terminal of the generator. Then momentarily “flash” the negative battery terminal to the generator field terminal.
———————————————————————————————————–
For more info about this product see our Catalog page 05-078, 1
See link Taco-Motos.Customparts.store or see our Flipbook
you can also find parts at our older website (www.taco-motos.eu)
