Linkert tool kit EL36-52 FL41-65 W*36-52, V-Twin

Tool kit for Linkert carburetors, Linkert tool kit EL36-52 FL41-65 W*36-52, V-Twin

Linkert tool kit includes six special drill pivots with brass knurled handles, an idle shot tool, and a venturi tool for use on all years brass Linkert carburetor bodies. Drill bit sizes include #55 (1.3mm), #53 (1.5mm), #56 (1.2mm), #42 (2.3mm) and #72 (0.6mm). The #55 drill bit is used by two different length handles. Slot tool blade sizes include .017″ and .009″ for all carburetors. The 1 3/16″ collar is used for M-4, ll, 16, and 18 carburetors. The 1 3/8″ collar is used for M-2, 5, 6, 21, 31, 41, 41L, 42, 51, 51L, 52, 54, 54B, 55, 58, 64, 84, 88, 90, 97, 341, 343, 344, 350, 352, and 641 carburetors. The 1 9/16″ collar is used for M-35, 35T, 35TP, 36, 36A, 45, 45A, 61, 61B, 74, and 74B carburetors. Note that drills and tool blades are for hand use only. The use of an arbor or hydraulic press is recommended.

in Stock 1

Brand: V-Twin
Article number:  789564

Linkert tool kit includes six special drill pivots with brass knurled handles, an idle shot tool, and a venturi tool for use on all years brass Linkert carburetor bodies. Drill bit sizes include #55 (1.3mm), #53 (1.5mm), #56 (1.2mm), #42 (2.3mm) and #72 (0.6mm). The #55 drill bit is used by two different length handles. Slot tool blade sizes include .017″ and .009″ for all carburetors. The 1 3/16″ collar is used for M-4, ll, 16, and 18 carburetors. The 1 3/8″ collar is used for M-2, 5, 6, 21, 31, 41, 41L, 42, 51, 51L, 52, 54, 54B, 55, 58, 64, 84, 88, 90, 97, 341, 343, 344, 350, 352, and 641 carburetors. The 1 9/16″ collar is used for M-35, 35T, 35TP, 36, 36A, 45, 45A, 61, 61B, 74, and 74B carburetors. Note that drills and tool blades are for hand use only. The use of an arbor or hydraulic press is recommended.

This product can be find in categorie Carburetor Tools

Tool kit for Linkert carburetors

———————————————————————————————————–

For more info about this product see our Catalog page 26-032, 0

See link our Flipbook