This show bike license light and taillight assembly is CNC machined from Billet aluminum. Pro-One gave as much attention to the back as they did to the front. Includes a unique hidden mounting design that eliminates any visible bolts on the face of the license frame. It includes Billet backing plate, Billet frame, Billet taillight and Billet wedge bracket to mount the assembly to your fender. Measures 6 3/4" x 7 1/4". Note: Light not included, must be ordered separately (ZPN162019).
Cover bolts straight onto all Wire Plus 004-series modules. Features holes for the check lights on these modules. Cover measures 2 1/8″ (54mm) high, 4″ (102mm) long and 1 3/4″ (44.5mm) wide.
The Convex5 features 5 wide-angle super bright LEDs in a smooth convex shaped housing, making it the brightest and widest angle “step” light available. Due to their wide angle light, the Convex5 will project an even glow of light eliminating the hot spots caused by average LEDs. Lights come with 4 feet long lead wires installed and feature VHB 3M™ tape on backside for easy installation.
The Convex5 features 5 wide-angle super bright LEDs in a smooth convex shaped housing, making it the brightest and widest angle “step” light available. Due to their wide angle light, the Convex5 will project an even glow of light eliminating the hot spots caused by average LEDs. Lights come with 4 feet long lead wires installed and feature VHB 3M™ tape on backside for easy installation.
Mounting speed nuts for late model Harley-Davidson taillights used on all models from 1973 to present (OEM 7501), 10 pack.
Pro-One’s Show-Bike taillight features a unique "Thin-line" design that is only one inch thick. CNC machined from a block of Billet aluminum and Chrome-plated. Mounts on most backing plates.Measures 2 7/16"x 5" (6,2 x 12,7 cm).
Change your stock Harley turn signals into something brand new and very exciting. These LED (Light Emitting Diodes) Turn Signal Upgrade Kits are very easy to install with no more tools than a screwdriver. Kits come with a see-through flat lens to show the LED’s, which are available in "Target", "Galaxy" and "Hexagon" pattern. Every kit contains two LED panels and two lenses. Dual Beam kits contain two LED panels and two lenses are turn signal/running light combinations and are available in amber, Single Beam kits replace single filament turn signals in your choice of amber or red.
This show bike license light and taillight assembly is CNC machined from Billet aluminum. Pro-One gave as much attention to the back as they did to the front. Includes a unique hidden mounting design that eliminates any visible bolts on the face of the license frame. It includes Billet backing plate, Billet frame, Billet taillight and Billet wedge bracket to mount the assembly to your fender. Measures 6 3/4" x 7 1/4". Note: Light not included, must be ordered separately (ZPN162019).
Cover bolts straight onto all Wire Plus 004-series modules. Features holes for the check lights on these modules. Cover measures 2 1/8″ (54mm) high, 4″ (102mm) long and 1 3/4″ (44.5mm) wide.
The Convex5 features 5 wide-angle super bright LEDs in a smooth convex shaped housing, making it the brightest and widest angle “step” light available. Due to their wide angle light, the Convex5 will project an even glow of light eliminating the hot spots caused by average LEDs. Lights come with 4 feet long lead wires installed and feature VHB 3M™ tape on backside for easy installation.
The Convex5 features 5 wide-angle super bright LEDs in a smooth convex shaped housing, making it the brightest and widest angle “step” light available. Due to their wide angle light, the Convex5 will project an even glow of light eliminating the hot spots caused by average LEDs. Lights come with 4 feet long lead wires installed and feature VHB 3M™ tape on backside for easy installation.
Mounting speed nuts for late model Harley-Davidson taillights used on all models from 1973 to present (OEM 7501), 10 pack.
Pro-One’s Show-Bike taillight features a unique "Thin-line" design that is only one inch thick. CNC machined from a block of Billet aluminum and Chrome-plated. Mounts on most backing plates.Measures 2 7/16"x 5" (6,2 x 12,7 cm).
Change your stock Harley turn signals into something brand new and very exciting. These LED (Light Emitting Diodes) Turn Signal Upgrade Kits are very easy to install with no more tools than a screwdriver. Kits come with a see-through flat lens to show the LED’s, which are available in "Target", "Galaxy" and "Hexagon" pattern. Every kit contains two LED panels and two lenses. Dual Beam kits contain two LED panels and two lenses are turn signal/running light combinations and are available in amber, Single Beam kits replace single filament turn signals in your choice of amber or red.