- 0031613658408
- info@taco-motos.eu
- 1041AC Petroleumhavenweg 26, Amsterdam, Netherlands
Luggage
If you have ever dug through your bags only to find mangled sunglasses, cell phones, keys, smokes, lighters or other small item on the bottom of the bag then the Top Shelf Bag Organizers are for you. These custom-molded trays are just three inches (7.5 cm) deep and store your valuables in the top of your bags for quick and easy access. The regular storage is still accessible underneath these installed units. Available to fit the OEM hard saddlebags on 1993 thru 2003, Tourpak top cases on all 1993 to present, as well as for the left side leather bags on 1997 thru 2008 Touring models. Top Shelf Saddlebag Organizers for 1993 thru 2003 models are designed specifically to fit left or right bags. All organizers come with a grip rubber cushion floor.
If you have ever dug through your bags only to find mangled sunglasses, cell phones, keys, smokes, lighters or other small item on the bottom of the bag then the Top Shelf Bag Organizers are for you. These custom-molded trays are just three inches (7.5 cm) deep and store your valuables in the top of your bags for quick and easy access. The regular storage is still accessible underneath these installed units. Available to fit the OEM hard saddlebags on 1993 thru 2003, Tourpak top cases on all 1993 to present, as well as for the left side leather bags on 1997 thru 2008 Touring models. Top Shelf Saddlebag Organizers for 1993 thru 2003 models are designed specifically to fit left or right bags. All organizers come with a grip rubber cushion floor.
The Down-N-Out bags are 6" longer and 2" lower than Arlen’s original Big Bags. They feature a patent pending taper on the lower section of the bag for a an extra 2 inches of ground clearance. These bags are constructed from high quality composite materials and are oven cured over a wide heat range to ensure stability and durability. Each bag has hand placed fibers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat finish to sand and prime, every part comes finished, primed with a super high quality polyester sanding primer and is ready to paint. Down-N-Out Bags are designed to fit factory lids and hardware (NOT included). The Down-N-Out Fender super stretched fenders are designed to work and flow with the Down-N-Out saddlebags. Constructed with the same high quality composite materials and ready for paint finish, they come with hidden steel fender support brackets and flexible hidden antenna for extra clean installation. Come with exhaust extensions and chrome heat shields. Fenders are available with a US size license plate recess, which include a billet Ness/RWD LED license/taillight assembly with turn signals that mounts in the recessed area of the fender. Also available without license plate recess and taillight assembly.
The Down-N-Out bags are 6" longer and 2" lower than Arlen’s original Big Bags. They feature a patent pending taper on the lower section of the bag for a an extra 2 inches of ground clearance. These bags are constructed from high quality composite materials and are oven cured over a wide heat range to ensure stability and durability. Each bag has hand placed fibers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat finish to sand and prime, every part comes finished, primed with a super high quality polyester sanding primer and is ready to paint. Down-N-Out Bags are designed to fit factory lids and hardware (NOT included). The Down-N-Out Fender super stretched fenders are designed to work and flow with the Down-N-Out saddlebags. Constructed with the same high quality composite materials and ready for paint finish, they come with hidden steel fender support brackets and flexible hidden antenna for extra clean installation. Come with exhaust extensions and chrome heat shields. Fenders are available with a US size license plate recess, which include a billet Ness/RWD LED license/taillight assembly with turn signals that mounts in the recessed area of the fender. Also available without license plate recess and taillight assembly.
If you have ever dug through your bags only to find mangled sunglasses, cell phones, keys, smokes, lighters or other small item on the bottom of the bag then the Top Shelf Bag Organizers are for you. These custom-molded trays are just three inches (7.5 cm) deep and store your valuables in the top of your bags for quick and easy access. The regular storage is still accessible underneath these installed units. Available to fit the OEM hard saddlebags on 1993 thru 2003, Tourpak top cases on all 1993 to present, as well as for the left side leather bags on 1997 thru 2008 Touring models. Top Shelf Saddlebag Organizers for 1993 thru 2003 models are designed specifically to fit left or right bags. All organizers come with a grip rubber cushion floor.
If you have ever dug through your bags only to find mangled sunglasses, cell phones, keys, smokes, lighters or other small item on the bottom of the bag then the Top Shelf Bag Organizers are for you. These custom-molded trays are just three inches (7.5 cm) deep and store your valuables in the top of your bags for quick and easy access. The regular storage is still accessible underneath these installed units. Available to fit the OEM hard saddlebags on 1993 thru 2003, Tourpak top cases on all 1993 to present, as well as for the left side leather bags on 1997 thru 2008 Touring models. Top Shelf Saddlebag Organizers for 1993 thru 2003 models are designed specifically to fit left or right bags. All organizers come with a grip rubber cushion floor.
The Down-N-Out bags are 6" longer and 2" lower than Arlen’s original Big Bags. They feature a patent pending taper on the lower section of the bag for a an extra 2 inches of ground clearance. These bags are constructed from high quality composite materials and are oven cured over a wide heat range to ensure stability and durability. Each bag has hand placed fibers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat finish to sand and prime, every part comes finished, primed with a super high quality polyester sanding primer and is ready to paint. Down-N-Out Bags are designed to fit factory lids and hardware (NOT included). The Down-N-Out Fender super stretched fenders are designed to work and flow with the Down-N-Out saddlebags. Constructed with the same high quality composite materials and ready for paint finish, they come with hidden steel fender support brackets and flexible hidden antenna for extra clean installation. Come with exhaust extensions and chrome heat shields. Fenders are available with a US size license plate recess, which include a billet Ness/RWD LED license/taillight assembly with turn signals that mounts in the recessed area of the fender. Also available without license plate recess and taillight assembly.
The Down-N-Out bags are 6" longer and 2" lower than Arlen’s original Big Bags. They feature a patent pending taper on the lower section of the bag for a an extra 2 inches of ground clearance. These bags are constructed from high quality composite materials and are oven cured over a wide heat range to ensure stability and durability. Each bag has hand placed fibers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat finish to sand and prime, every part comes finished, primed with a super high quality polyester sanding primer and is ready to paint. Down-N-Out Bags are designed to fit factory lids and hardware (NOT included). The Down-N-Out Fender super stretched fenders are designed to work and flow with the Down-N-Out saddlebags. Constructed with the same high quality composite materials and ready for paint finish, they come with hidden steel fender support brackets and flexible hidden antenna for extra clean installation. Come with exhaust extensions and chrome heat shields. Fenders are available with a US size license plate recess, which include a billet Ness/RWD LED license/taillight assembly with turn signals that mounts in the recessed area of the fender. Also available without license plate recess and taillight assembly.
