Description
Andrews camshafts XL91-99 NV grind
in Stock SO
Brand: Andrews
Article number: 232654
Andrews has a number of performance cam designs for Evolution Sportster engines. All the cams listed will run to 6500 RPM with stock hydraulic lifters. Since the stock lifters are such proven units, we continue to recommend that they not be changed to solids. Andrews Evolution Sportster cams have stock base circle sizes so stock (non-adjustable) pushrods can be used (except for V9 or BV cams). Adjustable aluminum or chrome-moly steel pushrods are also available as shown (fixed length for 1991). The no. 2 (36 teeth) cam drive gear used in 2000 to present models is not the same as in 1991 thru 1999 models. For this reason separate part numbers are listed for 2000 to present models.
Note: 1991 Sportster engines are considerably different than earlier Evolution Sportsters. Cam gears for earlier Evolution Sportsters will not fit 1991 thru 1999 engines. Year 2000 and later models use a different no. 2 cam drive gear as 1991 thru 1999 models. For these reasons different part numbers are listed.2004 and later models have different valve stem diameter and valve springs, installation of cams with more than .515″ lift may need different valves, springs and collars.
This product can be find in categorie Cams for Evolution Sportster
BV/NV CAM KIT High lift cams for 88 cubic inch and larger motors. Andrews pushrods, high lift springs and collars required. BV cams are easy starting and run strong from 2000 to 6000+ RPM with stock hydraulics (1991 to present models need long pushrods)., 1991 thru 1999 (NV grind)
———————————————————————————————————–
For more info about this product see our Catalog page 07-073, 0
See link Taco-Motos.Customparts.store or see our Flipbook
you can also find parts at our older website (www.taco-motos.eu)
