Black push button switch

GZP Blk Mini push button switch 5/16 UNF

Black push button switch

This tiny little stainless steel push button switch comes with a special radius shaped spacer to allow mounting in handlebars. Switch works for turn signal. starter, horn, kill or hi-low, must be used with a switch relay. Requires a 9/32″ hole and 5/16″ UNF nut. Switch is less than 1/2″ in diameter and sticks only 1/4″ above the handlebar surface. Of course you can also install this switch on flat surfaces when you do not use the radius shaped spacer. Installation requires a 9/32″ drill and a 5/16-24 UNF tap. Switch comes with two 20″ wires installed.

in Stock 3+

Brand: Zodiac (Genuine Zodiac Products)
Article number:  370338

This tiny little stainless steel push button switch comes with a special radius shaped spacer to allow mounting in handlebars. Switch works for turn signal. starter, horn, kill or hi-low, must be used with a switch relay. Requires a 9/32″ hole and 5/16″ UNF nut. Switch is less than 1/2″ in diameter and sticks only 1/4″ above the handlebar surface. Of course you can also install this switch on flat surfaces when you do not use the radius shaped spacer. Installation requires a 9/32″ drill and a 5/16-24 UNF tap. Switch comes with two 20″ wires installed.

This product can be find in categorie Handlebar Controls

Black push button switch

———————————————————————————————————–

For more info about this product see our Catalog page 04-064, 0

See link our Flipbook